gistfile1.txt
· 859 B · Text
Raw
SET_GCODE_VARIABLE MACRO=PRINTER_PARAM VARIABLE=fan0_min VALUE=30 ;compensate for fan speed
SET_VELOCITY_LIMIT ACCEL_TO_DECEL=2500 ;revert accel_to_decel back to 2500
M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate
M140 S[bed_temperature_initial_layer_single] ;Set bed temp
G28 X Y ;Home XY axes
M190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize
G28 Z ;Home Z axis & load bed mesh
BED_MESH_CALIBRATE PROBE_COUNT=5,5 ;Auto bed level
M104 S[nozzle_temperature_initial_layer] ;Set nozzle temp
G92 E0 ;Reset Extruder
G1 X-2.0 Y20 Z0.3 F5000.0 ;Move to start position
M109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize
G1 Z0.2 ;Lower nozzle to printing height
G1 Y145.0 F1500.0 E15 ;Draw the first line
G1 X-1.7 F5000.0 ;Move to side a little
G1 Y30 F1500.0 E15 ;Draw the second line
G92 E0 ;Reset Extruder
| 1 | SET_GCODE_VARIABLE MACRO=PRINTER_PARAM VARIABLE=fan0_min VALUE=30 ;compensate for fan speed |
| 2 | SET_VELOCITY_LIMIT ACCEL_TO_DECEL=2500 ;revert accel_to_decel back to 2500 |
| 3 | M220 S100 ;Reset Feedrate |
| 4 | M221 S100 ;Reset Flowrate |
| 5 | |
| 6 | M140 S[bed_temperature_initial_layer_single] ;Set bed temp |
| 7 | G28 X Y ;Home XY axes |
| 8 | M190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize |
| 9 | G28 Z ;Home Z axis & load bed mesh |
| 10 | BED_MESH_CALIBRATE PROBE_COUNT=5,5 ;Auto bed level |
| 11 | |
| 12 | M104 S[nozzle_temperature_initial_layer] ;Set nozzle temp |
| 13 | G92 E0 ;Reset Extruder |
| 14 | G1 X-2.0 Y20 Z0.3 F5000.0 ;Move to start position |
| 15 | M109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize |
| 16 | G1 Z0.2 ;Lower nozzle to printing height |
| 17 | G1 Y145.0 F1500.0 E15 ;Draw the first line |
| 18 | G1 X-1.7 F5000.0 ;Move to side a little |
| 19 | G1 Y30 F1500.0 E15 ;Draw the second line |
| 20 | G92 E0 ;Reset Extruder |